Home  >  Best CASE Exporter  >  vacuum casting Warranty  > 

vacuum molding plastic best material INDUSTRIAL-MAN

vacuum molding plastic best material INDUSTRIAL-MAN

vacuum molding plastic best material INDUSTRIAL-MAN
  • vacuum molding plastic best material INDUSTRIAL-MAN

vacuum molding plastic best material INDUSTRIAL-MAN

MOQ
1 piece
Payment
50% when place order+50% before delivery
Delivery time
1 weeek also
Material
Plastic-ABS;PP;PMMA;PC and silicone rubber;
Color of material
natural;white;black;transparent;
Surface treatment
painting;slik screen;polish etc
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Product Comparison
custom 3d printing has the following advantages: well-chosen materials, reasonable design, stable performance, excellent quality, and affordable price. Such a product is up to the market demand.We guarantee that all of our products can meet the with strict QC procedure strictly conducted.After being improved greatly, Industrial-man's custom 3d printing is more advantageous in the following aspects.
Application Scope
The rapid manufacturing produced by Industrial-man can be used in many fields.With rich manufacturing experience and strong production capability, Industrial-man is able to provide professional solutions according to customers' actual needs.We guarantee that all of our products can meet the with strict QC procedure strictly conducted.
Company Advantages
1. The raw materials of INDUSTRIAL-MAN vacuum molding plastic go through strict inspections. Each block or raw sand needs to be inspected carefully before using to ensure the minimum waste.
2. Every small detail in the development of this product is paid attention to.
3. This product is tested before delivery to meet top-notch quality standards.
4. Industrial-man technology development Co.,Ltd. has set up a full range of multi-channel procurement platforms.
5. Industrial-man technology development Co.,Ltd. initiates the overseas production bases for vacuum injection .


A process dedicated to making exquisite hand models and small batch reproduction, widely used for proofing of injection molded products. The commonly used plastic materials for vacuum casting are PP and PA. The color selection and strength of molded parts are very flexible, which is very suitable for product designers to make products.


Detailed process


 Pre-preparation:

two pieces of silicone mold are turned over with a single piece of finished product.


Vacuum casting:

Combine the two pieces of silica gel mold prepared in advance and place them in the environment of 65°-70°. The two pieces of silicone mold joints will melt until they are seamlessly connected.


De-molding:

The air in the silicone mold is evacuated, and the drain tube is poured into the liquid PUR until it fills the cavity. Cooling (45 minutes - 4 hours)


◆ Cut two pieces of silicone mold, remove the finished product, wait for trimming and sanding



Steps of Vacuum Casting

  • ◪  Before the production of Vacuum Casting, we need to make a sample by CNC machining or 3D printing.

  • Then mix silicone with curing agent. The appearance of Vacuum Casting is a flowing liquid, component A is Silicone, component B is a curing agent.

  • ◪  Vacuum evacuations:

  • After the silicone and curing agent are mixed evenly, vacuum evacuation is performed. The time for vacuuming should not be too long. Under normal circumstances, do not exceed 10 minutes. If the vacuum is too long, the silicone will cure immediately. The cross-linking reaction was produced so that the silica gel became one piece and could not be painted or poured.

  • ◪   Brushing or operation process:

  • Pull the evacuated silicone on the sample by brush or pour. (Note: The product or model to be copied need to use release agent before pour the silicone). Then brush the silicone on the top of the product, brushing must be uniform, after 30 minutes, paste a layer of gauze fiber weft cloth to increase the strength and tensile of silicone.

  • ◪  Outer mold production:

  • Generally used methods and materials are surrounding the mold by a plastic sheet or wood, then fill mold cabinet with plaster. Another method is to brush a layer of resin then paste a layer of glass fiber cloth, then brush and then paste, repeated two or three layers can complete the mold outside.

  • ◪  Filling or pouring mold operation method:

  • Filling or pouring mold is used for relatively smooth or simple products, no mold line save time and labor.



Company Features
1. From the beginning of the brand's creation, Industrial-man technology development Co.,Ltd. has focused on the innovative development of vacuum injection .
2. Industrial-man technology development Co.,Ltd. has a group of highly qualified R&D team.
3. Our role in society goes beyond supplying services and products to our customers. We strive to make a positive impact in the communities that we serve – the places where our people and customers live and work. Check now! INDUSTRIAL-MAN expects customers to get comprehensive services here. Check now! The company incorporates social responsibility into its overall business developing strategy. To execute this strategy, we are trying hard to end or relief the poverty of local areas by driving local economic growth. Check now! For years, we've been focusing on serving clients with our finest process vacuum and thoughtful service. Check now!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...