Home  >  Best CASE Exporter  >  vacuum casting Warranty  > 

INDUSTRIAL-MAN silicone vacuum mould casting manufacturer for bumper

INDUSTRIAL-MAN silicone vacuum mould casting manufacturer for bumper

INDUSTRIAL-MAN silicone vacuum mould casting manufacturer for bumper
  • INDUSTRIAL-MAN silicone vacuum mould casting manufacturer for bumper

INDUSTRIAL-MAN silicone vacuum mould casting manufacturer for bumper

MOQ
1 piece
Payment
50% when place order+50% before delivery
Delivery time
1 weeek also
Material
Plastic-ABS;PP;PMMA;PC and silicone rubber;
Color of material
natural;white;black;transparent;
Surface treatment
painting;slik screen;polish etc
Price
Get Latest Price
Get the latest price
Quantity Needed:
Pieces
E-mail:
Application Scope
Industrial-man's cnc service can meet the different needs of customers.Industrial-man always adheres to the service concept to meet customers' needs. We are committed to providing customers with one-stop solutions that are timely, efficient and economical.We guarantee that all of our products can meet the with strict QC procedure strictly conducted.
Company Advantages
1. The production of INDUSTRIAL-MAN vacuum mould casting adopts lasers process method. This method can help cut, mark or weld intricate details with accuracies to one micron.
2. The product is portable. The materials used are extremely lightweight that can facilitate device portability without sacrificing strength.
3. We also has got the vacuum mould casting certificates and vacuum moulding process society responsibility.


A process dedicated to making exquisite hand models and small batch reproduction, widely used for proofing of injection molded products. The commonly used plastic materials for vacuum casting are PP and PA. The color selection and strength of molded parts are very flexible, which is very suitable for product designers to make products.


Detailed process


 Pre-preparation:

two pieces of silicone mold are turned over with a single piece of finished product.


Vacuum casting:

Combine the two pieces of silica gel mold prepared in advance and place them in the environment of 65°-70°. The two pieces of silicone mold joints will melt until they are seamlessly connected.


De-molding:

The air in the silicone mold is evacuated, and the drain tube is poured into the liquid PUR until it fills the cavity. Cooling (45 minutes - 4 hours)


◆ Cut two pieces of silicone mold, remove the finished product, wait for trimming and sanding



Steps of Vacuum Casting

  • ◪  Before the production of Vacuum Casting, we need to make a sample by CNC machining or 3D printing.

  • Then mix silicone with curing agent. The appearance of Vacuum Casting is a flowing liquid, component A is Silicone, component B is a curing agent.

  • ◪  Vacuum evacuations:

  • After the silicone and curing agent are mixed evenly, vacuum evacuation is performed. The time for vacuuming should not be too long. Under normal circumstances, do not exceed 10 minutes. If the vacuum is too long, the silicone will cure immediately. The cross-linking reaction was produced so that the silica gel became one piece and could not be painted or poured.

  • ◪   Brushing or operation process:

  • Pull the evacuated silicone on the sample by brush or pour. (Note: The product or model to be copied need to use release agent before pour the silicone). Then brush the silicone on the top of the product, brushing must be uniform, after 30 minutes, paste a layer of gauze fiber weft cloth to increase the strength and tensile of silicone.

  • ◪  Outer mold production:

  • Generally used methods and materials are surrounding the mold by a plastic sheet or wood, then fill mold cabinet with plaster. Another method is to brush a layer of resin then paste a layer of glass fiber cloth, then brush and then paste, repeated two or three layers can complete the mold outside.

  • ◪  Filling or pouring mold operation method:

  • Filling or pouring mold is used for relatively smooth or simple products, no mold line save time and labor.



Company Features
1. INDUSTRIAL-MAN has been highly recognized and praised by customers at home and abroad.
2. Industrial-man technology development Co.,Ltd. has advanced and sophisticated equipment coupled with superb technology to ensure good quality.
3. The goal of INDUSTRIAL-MAN brand is to take the lead in the field of vacuum injection . Inquiry! Industrial-man technology development Co.,Ltd. strives to become the first brand in world's vacuum casting market. Inquiry!
Favorable rate
100%
Buyer impression
This product has no buyer impression
  • All reviews(0)
  • Praise (0)
  • Average (0)
  • Bad review (0)
Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...