3d guns. the printers, problems and politicians

by:INDUSTRIAL-MAN     2019-08-25
Rebecca Everett | New Jersey.
ComOfficials in New Jersey and across the country have not given up on plans to stop Texas non-profit organizations from posting anyone making 3D online
Printing guns, the battle does not seem to end soon.
The issue began in June, when the Justice Department, together with Austin\'s defense lawyers, resolved a lawsuit that allowed the group to offer downloadable plans starting on Wednesday.
New Jersey attorney general gulbir greevall and seven other states sued to block the release, and on Tuesday afternoon judges in Newark and Seattle ordered non-profit organizations not to release any additional designs until the hearing. 12.
Cody Wilson, founder of Distributed, told CNN that he had suspended downloads on his site, untll.
Gurbir called it a \"big win\", but the gun rights group has released some plans on Friday. Other 3D-
Printed gun designs have been on line for more than five years, but with the dispute resolved, concerns about weapons reached a level of fanfare last week.
Here\'s everything you need to know about the 3D printing gun: in the archive photo of May 10, 2013, Cody Wilson took a full 3-D-
He used a printer at his home in Austin, Texas. (
American Austin Hotel
Politicians through AP)What are 3D-
The printed gunsMost 3D printer uses melted thermoplastic plastic to build the model according to the design, a super
A thin layer above the other.
These printers can be used to make plastic gun pieces that can be assembled into an entire weapon. The most extensiveknown 3D-
The printing gun was a pistol Liberator created by Wilson in 2013.
It has only one bullet and the function part of the gun is completely plastic in addition to the shooting needle.
According to The Telegraph, federal law requires that all guns must have some metal, so anyone who makes a gun should put a small metal cube on the handle.
Veteran Wired writer Andy Greenberg has tried three ways to make untraceable AR-15.
Printing technology also allows people with 3D printers to make parts for guns, including those that cannot be legally purchased without a license.
Most of AR-
There are 15 online, but federal law says you can\'t buy low receivers for guns
The core of the gun-
No license.
Websites like DEFENCE Distributed have blueprints created from 3D printers.
According to the cable reporter who tried it in the video above, the piece can be assembled into a gun with the purchased metal parts.
Why does anyone want 3D?
Most of the reasons why someone will try to print a gun in 3D are about the skirting safeguards, although there must be some enthusiasts who might like to print one for fun and challenge.
People who are not allowed to buy guns because background checks do not pass can make guns with 3D printers.
If someone wants to make and sell a gun that cannot be tracked through a serial number, the 3D printer can do the same. Some 3D-
If the metal pieces in the handle are omitted and the machine is not sensitive enough to detect bullets in the chamber, the printing gun may also be ignored.
In 2013, a 3D was built by an Israeli journalist.
Printed pistolan sneaked into Prime Minister Benjamin Netanya\'s parliamentary speech to prove how easy it is to pass through metal detectors (video above).
But does the practice expert of 3D printing guns agree
Even if the person can\'t legally buy a gun, printing is not a very practical way to get the guns available.
At a very basic level, some guns tend to separate after firing a few rounds and sometimes send out plastic flights.
The Liberator has only one bullet and has poor accuracy.
It is widely believed that the level of 3D printers needed to make weapons costs thousands of pounds, although Forbes reported that an amateur made a basic gun with a $1,725 printer (video above)
Soon after the liberators came out.
In any case, experts say criminals looking for guns on the street are more likely to buy cheaper, more functional guns.
Speaking of manufacturing AR-15s with 3D-
Printed low receiver, there are a lot of videos on the internet showing the success of this gun launch, but Wired found that this is not the best or most common way to get this gun.
Anyone can buy 80-percent-
Complete the metal under the receiver online, then complete it with a drilling machine, and make some efforts.
ABC Action News did this for $600 in four hours. Or $2,000.
Less than most 3D printers.
Defense of Ghost Gunners for distributed sales.
According to Wired, the desktop mill can carve a lower receiver from a piece of aluminum according to the digital design.
According to the Federal Bureau of Alcohol, Tobacco, Firearms and Explosives, are they legalA people who \"can usually make guns for personal use (ATF).
Despite concerns about the lack of serial numbers for guns, amateurs have been doing so as long as the guns are still there.
But there are also some restrictions.
Since 1988, federal law has banned non-production
Probing gun
Therefore, the plastic gun maker is required to include a metal cube in the gun.
It is also illegal to manufacture any firearms for sale without special permission from the ATF.
Several people in New Jersey have been charged with doing so.
State gun laws still apply, so people in New Jersey who don\'t have a proper gun permit may be arrested for owning one of these manufactured guns, or if they make and own any guns that are prohibited here, like assault rifles.
In May 10, 2013, Cody Wilson, founder of Defense Distributed, presented a 3D-made plastic pistol
He used a printer at his home in Austin, Texas. (
American Austin Hotel
Politicians through AP)
How long has 3D been-
While many are concerned that the gun schematic will go online on Wednesday, in fact, these plans have been online for more than five years.
Wilson, 24, an extreme libertarian, began studying his so-
Known as the wikiweapon project in 2012, he plans to publish his blueprint online.
In the same year, he3D printed an AR-
According to Forbes, bankruptcy authorities may shoot a few shots.
According to a Forbes reporter invited to watch, he made and successfully killed the Liberator pistol in 2013.
He posted the design online and downloaded more than 100,000 times before the FBI ordered him to dismantle it
The decision was overturned a month ago.
Still, his design version still exists elsewhere on the Internet, as well as other guns --
Other designs were proposed and shared by print lovers.
In addition, the Ministry of Defense released some designs a few days ago, which officials say have been downloaded more than 1,000 times.
According to Gizmodo, shortly after Wilson made the plastic gun, solid concept, a custom manufacturing company based in Austin also made the working steel of the 1911 pistol on its advanced printer
The company has a federal gun license (FFL)
A company executive said in a promotional video removed from Youtube on Tuesday that guns would be sold. Have 3D-
If someone shot another person with a 3D gun, there is no report in the news.
According to news reports, several fatal shootings were assembled from parts people bought online, but one of the headlines was 3D printing.
The most famous shooting took place on 2013, when John Zawahri, who was unable to pass the background check, according to the authorities, made a assault rifle at a university in California with an unfinished receiver, and killed five people in the shooting.
Why did the federal government allow these plans to be re-implemented in the United States in 2013? S.
The State Department told Wilson that the release of the open source schematic violates federal arms export laws because the blueprint can be downloaded by people outside the United States. S.
The state has yet to decide whose weapons to sell.
He sued, according to ABC News, and the State Department said this month that it had settled and would pay Wilson $40,000 in legal fees because the change in the way guns were exported made the matter meaningless.
The department also said guns are widely used in the United States. S. , 3D-
No threat posed by printed weapons.
Resistance to this idea comes from the usual sources, but also from President Donald J. Trump.
He said on Twitter that he would \"investigate\" the issue --
Already talked to NRA. -
Because it doesn\'t seem to make much sense to print a gun!
\"In July 26, what politicians in New Jersey and elsewhere were doing to stop it all, and grayvale issued a stopand-
The group is required not to \"publish printable-
Gun computer files used by residents of New Jersey \"or face legal proceedings.
Wilson filed a federal civil lawsuit against this, claiming that the legal threat amounts to \"a violation of the prior restrictions of the Constitution \"---
It applies to terms that governments strive to ban the publication of information they consider harmful.
Wilson said on Twitter on Monday that he was charged with \"at least 21 state attorneys general.
\"New Jersey is one of the eight states that sued the federal government over the settlement.
Grewal said on Twitter on Tuesday that Wilson agreed not to post any other designs on his website until the September hearing, and the judge officially issued them under judicial orders.
As we know, Wilson said on Twitter that reconciliation is the end of gun control in the United States, but lawmakers are already working to limit 3D-Printing weapons
Democratic senators, including the United States, on TuesdayS. Sen.
Bob Menendez announced that they are sponsoring two bills that will fill the hole and allow those who cannot legally own a gun to make a gun using a 3D printer or parts purchased online, it\'s like a receiver with a 80% low.
According to a press release from Menendez\'s office, the 3D printing security law is trying to limit the release of digital codes that can be programmed into 3D printers to print guns automatically.
According to the press release, the non-traceable Firearms Act of 2018 will redefine firearms, including gun kits and partial receivers, and revise the definition of \"making guns\" to include 3D printing.
With these changes, anyone who creates or even parts of the receiver needs a manufacturer\'s license and must give each receiver a serial number before selling.
Anyone trying to buy part of the receiver must be subject to background checks, the press release said.
This article includes materials from the Associated Press.
Rebecca Everett @ njadvancemedia could be reached. com.
Follow her on Twitter @ rebeccajeverett. Find NJ. Com on Facebook
Give us a hint. nj.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...